Topic: Bike Will not Start (Read 2943 times)

schulti1 · « **on:** April 28, 2008, 06:53:27 PM »

My VTX1800c fell over on it right side and not it will not start. When I flip on on switch I don't hear the sound of the fuel injector kicking in either. Need HELP. There is gas in the tank

SouthernXer · « **Reply #1 on:** April 28, 2008, 06:57:10 PM »

Check your battery connection.

crow57 · « **Reply #2 on:** April 28, 2008, 07:00:07 PM »

Not trying to be a smart-Cranberries or question your intelligence or anything, some people just never touch the kill switch and forget it's there... but... it had to be said... Hey, it's possible.

schulti1 · « **Reply #3 on:** April 28, 2008, 07:04:12 PM »

The battery connection is good. Is there a reset on the bike after it falls over. The bike did not fall hard. I don't hear the fuel injection start . The bike was start good until this happen

murray_61 · « **Reply #4 on:** April 28, 2008, 07:15:14 PM »

Ground Fix?

http://tech.vtxoa.com/index.php?sid=87743&lang=en&action=artikel&cat=14&id=33&artlang=en

read the last 2 posts here...

http://www.texasxriders.com/index.php?topic=1505.0

Do your headlights come on when you turn the key on? Any noise at all when you turn key or push start button?

schulti1 · « **Reply #5 on:** April 28, 2008, 07:22:57 PM »

The lights horn and signals work. But I don't hear the fuel injection noise when I fip the kill swith in the on postion

RedDragon · « **Reply #6 on:** April 28, 2008, 07:27:42 PM »

There is a switch that is supposed to kill it when it falls over, but it should reset when you turn the key off. I am not sure how it works but maybe it did not reset for some reason.

SouthernXer · « **Reply #7 on:** April 28, 2008, 07:31:58 PM »

Fuses? Relay? maybe one came loose.

RedDragon · « **Reply #8 on:** April 28, 2008, 07:34:42 PM »

You might even check the owners manual to see if there is anything about resetting.

schulti1 · « **Reply #9 on:** April 28, 2008, 07:36:52 PM »

The fuses are OK and the owners manual doesn't say anything about a reset switch

RedDragon · « **Reply #10 on:** April 28, 2008, 07:46:56 PM »

Ok, there is a kill switch on the kickstand, you might check it. Or its not in gear is it?

schulti1 · « **Reply #11 on:** April 28, 2008, 07:53:37 PM »

The bike is not in gear and and the kick stand is up

RedDragon · « **Reply #12 on:** April 28, 2008, 07:58:07 PM »

No problem, just trying to eliminate the easy stuff. It is hard to troubleshoot over the computer. I will see if I can do a quick search on vtxoa to see if anyone else has had this problem. Will get back to you.

crow57 · « **Reply #13 on:** April 28, 2008, 08:11:11 PM »

Check out bareasses' ECU page:

http://bareasschoppers.com/ECUcodes/

RedDragon · « **Reply #14 on:** April 28, 2008, 08:17:45 PM »

Cool, that should help!

Texas X Riders

Author Topic: Bike Will not Start (Read 2943 times)

schulti1

Bike Will not Start

SouthernXer

Re: Bike Will not Start

crow57

Re: Bike Will not Start

schulti1

Re: Bike Will not Start

murray_61

Re: Bike Will not Start

schulti1

Re: Bike Will not Start

RedDragon

Re: Bike Will not Start

SouthernXer

Re: Bike Will not Start

RedDragon

Re: Bike Will not Start

schulti1

Re: Bike Will not Start

RedDragon

Re: Bike Will not Start

schulti1

Re: Bike Will not Start

RedDragon

Re: Bike Will not Start

crow57

Re: Bike Will not Start

RedDragon

Re: Bike Will not Start