Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Dusty]

And this one!!  By George I think I got it!!  LOL 


 




             

Congratulations, you finally did it Yee Haw[/glow][/color][/i][/b]

Totally off topic but do you use that welding machine I see in the back ground? I only ask because a guy gave me one just like it a few months back and I have never hooked it up. I thought it was an antique until I saw yours. Does it weld good?

[hooter]

Strange thing is, he had to put the pictures on bigbikeriders to post them...wouldn't use our gallery!

Hooter, I figure BBT4 for a finish time!
Notice the bungee cord holding the back fender together!

Got a dollar sez the bungie is still there for the BBT

YOU OWE ME A DOLLAR!! Bungee gone already!! 

      OK I'll pay ya next time
 Good deal on the wheels, wish I'd seen'um first

[tom cat]

If you have one of those welders, you own as much in the way of a stick welder as most will ever need. Its almost bullet proof, it will burn rod bigger than your home breaker can handle. I have one in the shop, for a home welder that is a fine little machine.At work I weld a lot That little cracker box will perform with the best of them. Your friend gave you a damn good welder.

[Dusty]

If you have one of those welders, you own as much in the way of a stick welder as most will ever need. Its almost bullet proof, it will burn rod bigger than your home breaker can handle. I have one in the shop, for a home welder that is a fine little machine.At work I weld a lot That little cracker box will perform with the best of them. Your friend gave you a damn good welder.

Thanks Tom Cat!

I just need to change out my AC plug and I can try it out. Mostly I just gorilla weld. 

[tom cat]

You may know or not, that it won't plug in to the dryer outlet. Some houses have aluminum wire. don't do it. if aluminum is involved . Yes I learned that the hard way.That welder is capable of pulling a lot of amps.Make sure it is supported with enough current to do what you want it to do.I made the mistake of useing mine as a cutting torch, yes it will do that, all you need is air, to blow the puddle away.The welder worked fine the breaker triped when the wires were smokeing. Sorry to hijack a thread but it is important.

[Dusty]

You may know or not, that it won't plug in to the dryer outlet. Some houses have aluminum wire. don't do it. if aluminum is involved . Yes I learned that the hard way.That welder is capable of pulling a lot of amps.Make sure it is supported with enough current to do what you want it to do.I made the mistake of useing mine as a cutting torch, yes it will do that, all you need is air, to blow the puddle away.The welder worked fine the breaker triped when the wires were smokeing. Sorry to hijack a thread but it is important.

I'm copper and used a welder on this circuit before, just need to swap the outlet to match this machine.
Thanks for the heads up. I may be hollering at ya for tips when I get it running.   

[Chad]

 This picture is of my bike before!


  This is my Bike After!!

[Chad]

[larry_357]

   The bike looks great  .Who did the chroming of your wheels that is my next bike project ?

[hooter]

Chad that looks great

[Chad]

   The bike looks great  .Who did the chroming of your wheels that is my next bike project ?

  I got the rims from a Chromer in San Diego,Cali. called Cycle Image.

[Chad]

Chad that looks great

  Thanks HOOTER!! 

[hooter]

Chad that looks great

  Thanks HOOTER!! 

I guess that's 2 dollars now One for the bungie cord and one for being back together before the BBT 

[THOR]

Looks GREAT 

[snake]

Yeah Hoot, I guess I'll give him a dollar also. LOL Looks great Chad! That plate mount is killer on it too!