Didn't get butt burn till about 60 miles I figure! It was great! He could have even gone a little lower tho. Maybe I'll send it back for an adjustment after he starts doing the custom seat covers.Back to the butt burn, now I can ride all the way up to Clark's BBQ and not have to do the seat squirm at 70mph
You can get a 6mm Torx drive and tap it in with a hammer. It looks like allen wrench except it has pointed edges around it. If it's stripped to bad you may have to get a 7mm size and drive it in with a hammer. When you get the bolt out and your seat redone I suggest you do this mod listed below. You'll never have this problem again http://www.bareasschoppers.com/On the left side of the page scroll down to seat modifications. That will do the trick.Al