Larry, if your engine is properly tuned you should be getting some deceleration popping; just not a whole lot of loud popping.
Ok yesterday went to the tech session and did a valve adjustment and installed the back off plates finally after doing the pair valve thing.In order to do the valve adjestment had to undo the front exaust to remove the cover to get to the timing area.After getting the thing back together made a noise it was not making before and thought it was an exaust leak so tightened the pipe a little more.On the way home would pop between shifting and a bit more than it used to on decel.After getting home replaced the front crush gaasket but still making that weird noise from the engine any ideas?I sent Steve a pm.It ran great seemes a bit quicker on excell and no missing at any speed you run just the poppping between gears.
Quote from: hipshot on August 30, 2009, 07:26:42 PMLarry, if your engine is properly tuned you should be getting some deceleration popping; just not a whole lot of loud popping. Actually, mine is properly tuned, and I don't get any popping at all!