I installed my hypercharger... no problems to report, don't use the Jet kit that comes with it, it's worthless... get a Jet kit from DynoJet or similar. It took me about 3 hours, since then I have done a few and now it takes me about 2 hours including Jeting or the carb. Is very easyThats good to hear, Did you feel a power difference? Would you buy this part again?Thanks
I just installed a Tornado air kit on my 1300 this past week.It took me about a day mainly as I went super slow to be sure nothing was messed up as I did the job.I did the rejet and all went with a stage 3 jet but the hardest part was getting the fuel/air right as its not that easy to get to behind the carb.You can get an idea of the parts breakdown on www.bikebandit.com.Do not forget to remove the pair valve as well on mine just pluges the hose and will order the back off plates later.
The first tank I ran through was right at 50 mpg and thats driving up around 70 to 80 mph as well as alot of stop and go traffic.