Ok, pardon my ignorance, but here we go....as some of you know I'm installing a modified 18"X8.5" rear wheel(Gateway Xtreme) on a BCC softail swingarm on my 1800C. I'm going to copy an e-mail from Rob Jenquin regarding the placement of the spacers to center the wheel.
[It can be spaced between the two flanges to move the wheel right(stud #22). Then an equal spacer must be used between bearing(#18) and collar(#5). On the right a spacer is used Between collar(#3) and the swingarm.] quote
Rob
Now heres my question, followed by some pics...regarding collar #5 and Bearing #18 is #5 inside the bearing or the spider flange?
Now if #5 is in the #18 bearing how can the spacer be placed in between? if its in the flange,(which is what I'm thinking) then the placement will be relatively simple....any thoughts?