Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ViciousNoob]

I'm sure you fellas knew this, cause y'all are the VTX Kings and Queens (CouldBeFaster  )....

If ya hit your hand controls with 800, 1000, 1200 grit sandpaper and F,G, and H polishing compound on a bench grinder with a buffing wheel, then a shot of clear coat, they come out pretty OK...Whadda ya think?

[X-aholic]

sure look good. how much time you got in them

[CouldBFaster]

Queen! Whats your title on the board? 
Talk to me about queens when you have your first 100 miles on the bike.....
 
Don't cry its ok. Just polish with your hand..... LOL

[CouldBFaster]

Yeah Noob they look good but how much stuff are you taking off that bike before you even start riding it? but lt looks good as hell. Yell at me this week end I need to do some work on your carb.
 

[ViciousNoob]

sure look good. how much time you got in them

Prolly 3 hrs for both sides. Not too bad. Just gotta sand the pits out of them.

[X-aholic]

thats not bad at all

[Pug]

Prolly 3 hrs for both sides. Not too bad. Just gotta sand the pits out of them.

Leaves one to wonder why Honda dudn't do it...nice job. 

[twistedrcpilot]

FYI its a lot faster if you use a paint remover on the parts to remove the clear coat.  Then go over it with a polishing disc on a die-grinder.  Did mine with both resivors in less than an hour. Also, you can do your turn signal mounts, down tubes(1300's) and wheels the same way.

Just my .02.

[HeadGuess]

FYI its a lot faster if you use a paint remover on the parts to remove the clear coat.  Then go over it with a polishing disc on a die-grinder.  Did mine with both resivors in less than an hour. Also, you can do your turn signal mounts, down tubes(1300's) and wheels the same way.

Just my .02.

Man, if it only takes an hour I'll give you $50 bucks to do mine!

[X-aholic]

$50 is worth it to me also.