Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jam57]

Anyone around DFW got these? Wonderin if the front pipe runs below the frame, would it be a hassel
jackin the bike up. If some one has them could I take a look at them?
  Thanks,
  Jim

[Roller]

I'm not in that area, but I can tell you first hand that they DO run below the frame (3/8 to 1/4 inch), and  the heat shield scrapes in tight right corners.  You have to consider where you place the lift under the frame because of the pipes.  It's not a major obstacle, but just something you gotta keep in mind and watch.

[Chad]

 All what Roller said is true!! I have them on my bike and do kinda have to watch out for speed bumps! On corners I haven't hit them because I have some lamb chop floor boards and they hit before the pipe does. On jacking the bike it not that bad, there is enough room between the pipes and the from for the jack. All in all the sound it worth it!!   
  Ever out in the Greenville ,Sulphur Springs area give me a shout!! 
 Chad

[jam57]

Thanks for the replys guys. I ended up getting a set of the Roadburner 3" pipes. Put them on this evening. Very deep rumble. Nice at idle, very loud off idle. Did'nt have a chance to get on it to much, came back home and started on the intake after a brief cool down.
  Jim

[Chad]

You bet!!