Texas X Riders

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Handle bars needed  (Read 1063 times)

0 Members and 1 Guest are viewing this topic.

Xwrecker

  • Old Timer
  • ****
  • Posts: 463
Handle bars needed
« on: July 10, 2008, 08:33:16 AM »
I have an 06 1800 neo, and am in need of a set of handlebars for it. If anyone has a set lying around, gimme a holler. oem preferable but not needed. :)
This is the last thing I need to get my bike ready to ride,well ... other than getting my ankle back into shape  ;)   readtrio@hotmail.com
« Last Edit: July 10, 2008, 08:35:16 AM by Xwrecker »
Logged

Lucky

  • Board
  • Elvis
  • ******
  • Posts: 5285
  • Canyon Lake, TX
    • Facebook
Re: Handle bars needed
« Reply #1 on: July 10, 2008, 08:41:20 AM »
I can't remember for sure...doesn't the 1800 have the speedo attached to the handlebars?  I have a set of handlebars that Marigold so generously donated to me for my 1300 and I ended up not using them.  If it works out for you, you are more than welcome to have them.
Logged
"Lucky" Connie
'06 Pearl Dark Blue 1300C
If you don't love what you're doing, then don't do it.
Your chances of success are directly proportional to the degree of pleasure you derive from what you do.

Xwrecker

  • Old Timer
  • ****
  • Posts: 463
Re: Handle bars needed
« Reply #2 on: July 10, 2008, 11:10:33 AM »
My speedo is on the tank. Do you remember which model they came from? I think a speedo on the bars is a c model. Also, do you know the measurements? Mine where a "dresser" type, bout 6" tall with about 12" pullback.
Logged

Lucky

  • Board
  • Elvis
  • ******
  • Posts: 5285
  • Canyon Lake, TX
    • Facebook
Re: Handle bars needed
« Reply #3 on: July 10, 2008, 11:31:43 AM »
Geezzz Xwrecker you are gettin more technical then I am inclined  :D
Seriously, if I recall correctly the handlebars that Marigold and Jim gave me were off of a Shadow.  I was wanting to rise/pullback my stock 1300 bars.  I ended up going another route and kept my handlebars on the bike.  I do not know the size of the extra ones I have, I will try to measure them tonight and let you know, altho I don't think there is a way to measure pullback on them...just the width from tip to tip.  I will try to post a picture.
Logged
"Lucky" Connie
'06 Pearl Dark Blue 1300C
If you don't love what you're doing, then don't do it.
Your chances of success are directly proportional to the degree of pleasure you derive from what you do.

Dusty

  • Guest
Re: Handle bars needed
« Reply #4 on: July 10, 2008, 04:38:28 PM »
I have a set of stock 1800 C BARS you can have if they will work for you.
Logged

Xwrecker

  • Old Timer
  • ****
  • Posts: 463
Re: Handle bars needed
« Reply #5 on: July 10, 2008, 04:50:01 PM »
Quote from: Lucky on July 10, 2008, 11:31:43 AM
Geezzz Xwrecker you are gettin more technical then I am inclined  :D
Seriously, if I recall correctly the handlebars that Marigold and Jim gave me were off of a Shadow.  I was wanting to rise/pullback my stock 1300 bars.  I ended up going another route and kept my handlebars on the bike.  I do not know the size of the extra ones I have, I will try to measure them tonight and let you know, altho I don't think there is a way to measure pullback on them...just the width from tip to tip.  I will try to post a picture.


This is where you get the measurements.
Logged

Xwrecker

  • Old Timer
  • ****
  • Posts: 463
Re: Handle bars needed
« Reply #6 on: July 10, 2008, 04:52:43 PM »
Quote from: Dusty on July 10, 2008, 04:38:28 PM
I have a set of stock 1800 C BARS you can have if they will work for you.
I have tried a set of "c" bars and they are a bit too short on the pullback, and not quite wide enough.

Thanks tho.... 8)
Logged

Dusty

  • Guest
Re: Handle bars needed
« Reply #7 on: July 10, 2008, 04:59:24 PM »
Quote from: Xwrecker on July 10, 2008, 04:52:43 PM
Quote from: Dusty on July 10, 2008, 04:38:28 PM
I have a set of stock 1800 C BARS you can have if they will work for you.
I have tried a set of "c" bars and they are a bit too short on the pullback, and not quite wide enough.

Thanks tho.... 8)

That's why they were replaced with retro bars with 6 inch risers.  O0
Logged

Xwrecker

  • Old Timer
  • ****
  • Posts: 463
Re: Handle bars needed
« Reply #8 on: July 10, 2008, 09:47:45 PM »
Thanks for the offer Brother!   ;)
Logged

Xwrecker

  • Old Timer
  • ****
  • Posts: 463
Re: Handle bars needed
« Reply #9 on: July 11, 2008, 08:02:31 AM »
I bought some bars for my bike ... thanx for the help ppl.    ;)
Logged
 
SimplePortal 2.3.3 © 2008-2010, SimplePortal